Startsafe booster cables are equipped with overvoltage protection, which protect the electronic equipments and components of both vehicles involved in the starting process. During the start-process high inductive tensions can appear, e.g. by slipping off of t he battery clamps. These dangerous tensions tops are absorbed and reduced to a destruction free height.
The tow-coloured PVC-sheathed cable remains flexible also at lowest temperatures.
The fully insulated battery clamps are continuously constructed from sheet steel. Depending from the used conductor cross-section the clamps are strengthened with brass inserts. The later applied insulation on the sheet steel body consists of Escorenen Ultra EVA. Due to its special characteristic, this material is still shatterproof and impact-resistant at lowest temperatures.
A solid processing according DIN-standard 72553 and the own production guarantees a product that differs in particular by its quality and longevity from other booster cables.
On customer's request combinations with other battery clamps from our range are possible.
The booster cables are packed into neutral carrier bags or neutral cardboards, individual customer packing or customized supplements are possible.
Following an overview of the recommended and standardly manufactured booster cable:
Cross section | Length | Battery clamps | Packing | Weight |
16 sqmm | 3,0 m | H100 fully insulated | Polybag | 1,7 kg |
25 sqmm | 3,5 m | H200 fully insulated, strengthened | Polybag | 2,7 kg |
35 sqmm | 4,5 m | H500 fully insulated, double strengthened | Carton | 4,5 kg |
35 sqmm | 5,0 m | H900 fully insulated, cast brass | Carton | 5,3 kg |
50 sqmm | 5,0 m | H900 fully insulated, cast brass | Carton | 6,8 kg |
50 sqmm | 7,0 m | H1000/W fully insulated, cast brass | Carton | 8,6 kg |
Copyright 2010 © Ch. Humpert Metallwaren GmbH
.